Facnor Extrusion Bushing (10.5mm Stays) for FD230 / RX220 / RX260 Furlers

The bushing is used to centre the foil sections round the forestay, you should have two under the cap, one above each connector and one in the drum.

Features:

• Centering bushing
• Adapted to Ø 08-09mm forestay
• Polymer
• R26 foil section
• Inner drilling Ø10.5mm
• Adapted for the following models: RX220 / RX260 / FD230

Click on the following technical articles to find relevant information about Facnor spares parts below:

• Selection Guide: Facnor Spare Parts Model RX - Selection Guide
• Selection Guide: Facnor Spare Parts Model FD - Selection Guide