Facnor Extrusion Bushing (10mm Stays) for FD280 / LS200 / LS290 / LX200 / LX290 Furlers

The bushing is used to centre the forestay in the profiles, you should have two under the cap, one above each connector and one in the drum.

Features:

• Centering bushing
• Adapted to Ø 10mm forestay
• Polymer
• SX47 foil section
• Inner drilling Ø12mm
• LS200 / LS290
• LX200 / LX290
• FD280

Click on the following technical articles to find relevant information about Facnor spares parts below:

• Selection Guide: Facnor Spare Parts Model LS - Selection Guide
• Selection Guide: Facnor Spare Parts Model LX - Selection Guide
• Selection Guide: Facnor Spare Parts Model FD - Selection Guide