Ewol Propeller - Orion 3 Blades (Stainless Steel) w/ Shaft: Up to 1 3/8 in (35 mm) - Blade Dia: 19 in (482.6 mm)
Ewol Propeller - Orion 3 Blades (Stainless Steel) w/ Shaft: Up to 1 3/8 in (35 mm) - Blade Dia: 19 in (482.6 mm) is backordered and will ship as soon as it is back in stock.
Description
Description
Its core is made up of gears that allow the blades to navigate according to the fluid threads of the water while sailing and provide the correct angle of incidence during engine navigation, improving both performances under sail and under engine.
The orientation of the blades is fully automatic and the micrometric setting of the pitch is performed from the outside using the adjustment ring. This allows the thrust to be optimized during the motorized gear, providing high cruising speeds at a low number of revs, with the consequent reductions in fuel consumption.
E3 Orion brilliantly solves the problem of the lack of maneuverability of the boats when reversing, especially under difficult environmental conditions such as strong winds, limited spaces, rough seas, etc.
E3 Orion propeller, available for both the shaft line and the anti-shock device for Sail-Drive called FlexDrive, was designed to be installed, removed and adjusted with ease in just a few minutes, even with the boat in water.
E3 Orion contains innovative technical solutions in its shell combined with the use of advanced materials that guarantee mechanical characteristics and corrosion resistance that are far superior to those of traditional propellers.
Our Part # EWO-E3ORISHD1935 | Ewol Propellers Part # E3ORISHD1935
Features
Features
Features:
- Significant improvement in manoeuvrability.
- Increased sail speed.
- Motor speed optimization.
- Easy assembly and disassembly, even in water.
- Micrometric adjustment of the pitch from the outside.
- Very high corrosion resistance, built of stainless steel super-alloys.
- Dynamic balancing to cancel out vibrations.
- Sockets and interchangeable parts for unmatched lifespan.
- Versions with Titanium blades available.
- FlexDrive version with anti-shock joint.
- Three-year warranty on manufacturing defects.
- 100% quality control of all propellers.
Technical Information
Technical Information
Description | Specs |
---|---|
Material | Super-Duplex Steel + AISI3 16L |
Special material on request | Super-Duplex Steel + Titanium Alloy |
Vessel Type | Monohulls and multihulls |
Engine power | Up to 160 hp |
Shock dumper FlexDrive | Yes |
Number of blades | 3 |
Blade Model | High efficiency SWORD blades |